Electromagnetic Heating Full Auto Continuous Pyrolysis Refining Technology and Equipment-Scrap Tyre/Waste Plastic/Used Engine Oil

No Emissions, No Pollution, High Energy Saving Electromagnetic Heating Technology

1、 The patented inventor of our company grandly introduces the new electromagnetic heating technology.

Electromagnetic induction heating is a mature and advanced heating technology.The principle of heating is: through advanced circuit system, high-density magnetic field lines are generated in the induction coil wrapped outside the metal equipment, and a high-energy intermediate frequency magnetic field is formed inside the metal, which promotes the free electrons of the metal to collide with each other at high speed in the metal body with resistance, so as to increase the metal temperature rapidly.Medium frequency electromagnetic induction heating plays an important role in our industry and daily life with many advantages such as high thermal efficiency, fast heating, energy saving, safety and reliability.

The Second part : the scientific nature of waste tires/plastic refining

Tires , plastic basic raw materials such as the material with the petroleum extraction by the chemical reaction and processed . Oil refining its principle is to take the catalytic pyrolysis method , high temperature condition in the special catalytic pyrolysis agent role , make macromolecular broken chains cracking for small molecules . These small molecules of the C5H12-C11H24 etc is gasoline components ; C12H26-C20H42 for diesel components .

The basic raw materials in the refining process route when gasoline , diesel only through the different evaporation temperature period can get different densities . Cracking the liquid after about 10% -30%gasoline components for similar light , after adjustment can reach 90-93 gasoline standards ; About 70-%90% of the components for similar diesel , after a can achieve 0 # , -15 # , -# 20 diesel demand , they can be as industrial and civil use gasoline , diesel , even as power oil .  The specific process route :

the feasibility of waste oil refining

Oil is the separation of petroleum refining a line oil, the second line, three line oil known as base oil as the basic raw material processed by the harmonic.Molecular weight average at around 280.Waste oil refining its principle is to take the catalytic pyrolysis method, under the condition of high temperature by the special catalytic cracking effect, make the molecular chain scission cracking.These molecules C5H12 - C11H24 is gasoline components such as;C12H26 - C20H42 as diesel components.

The advantages of the Electromagnetic heating

First, The heat is particularly rapid compared with the traditional heating way, time shortened by 3/2; Only in a few seconds, the temperature of the reactor can reach hundreds degrees Celsius, which promotes the feeder materials melting rapidly and no dead band.

Second, Accurate temperature control.Using computer intelligence operation and the original creation of heating distributors, by the logical operation, achieve to reasonable heating and partition.Supporting to design an accurate temperature, which will make reaction conditions more scientific, accurate, sensitive. Temperature deference will be controlled within several degrees.

Third, Heating is especially environmental friendly.Electromagnetic induction heating is a green technology with modern technology. Combining with advanced frequency conversion technology, it does not release any harmful gas, and completely free from fire, smoke and noise and no fuel waste discharge.

Fourth, Fast starting.Electromagnetic heating is characterized by sweep-frequency soft starting. Successful starting rate high,strong anti-interference ability,reliable operation, simple operation,only need to press button.

Fifth,Durable use, There is no corrosion of sulfur dioxide after reactor heated.The durable life of the reactor will be up to 8 years even in condition of action in high temperature,which is much more longer than other kinds reactors.

Sixth, Safe and hygienic operation. Due to electromagnetic induction principle,electromagnetic induction coil wont touch with heating metals directly. The temperature which system heat radiation to external approaches ambient temperature.  Only below 50 ℃, ambient temperature low in working environment good,human can touch,temperature

in workshop reduces significantly.

Seventh, Compact structure,area-saving,finance-saving, Basic feature of equipment structure:wrap an insulating material with induction coil on the reactor without large heavy heating boiler,making the system all compact,simple and beautiful. In addition,system have sensor control board and intelligent control cabinet.

Eighth,  The most important is energy saving. The use ratio of electromagnetic induction heat is highest in all heating method,up to 98%. Its NO.1 characteristic is unidirectional heat transfer. The induction coil only generate electromagnetic induction on the metal reactor inside and produces high heat. .The heat loss was almost zero. According to the calculation, the energy saving rate is above 40% and the highest is 60%.